CineKing 4K has been able to complete the shooting task with great success. This time, the Runcam Hybrid 4K version can be added to meet the needs of different customers. We are pleased to introduce CineKing 4K to you, a lightweight and compact quad which can accomplish some tasks that traditional aerial photographic aircraft can not accomplish, with capability of shooting beautiful and moving film up to 4K 30fps. CineKing is mainly for indoor shooting, not only aerial photography, but also through obstacles, competitions, etc. The propeller protection is very safe. It has good airflow, safety, durability, and high efficiency, without fear that the propeller will harm people. CineKing is carefully assembled and tested by the GEPRC team. When you get the BNF suite, you can bing and fly.For PNP suite, you need a sbus reciever of your own.
Changelog:
May 2022: Gyroscope changed from MPU6000(SPI) to 6-Axis.
Features:
Runcam Hybrid HD Video Recording: 4K@30fps / 2.7K@60fps / 2.7K@50fps / 1080P@120fps / 1080P@100fps / 1080P@60fps / 1080P@50fps
Dual Camera System: True 145° Wide Angle 4K HD & FPV Camera
New Propeller Guard: Better airflow, higher flight efficiency.
Using STABLE F411 electronic system, which is very stable.
Full Soft Mounted FC System: Provides a clean operating environment for gyro.
Say Goodbye to Jelly: Stable video and comfortable FOV.
The newly designed GEP-CK2 frame has a more reasonable layout.
Aerial Photography Friendly: No sight of propellers and propeller protection frames in your video.
Exquisite Assembly Process: Eliminate any potential installation problems.
Fine pre-tuned PIDs by GEPRC team, you can bind and fly.
Power Input:DC 5-20V (Non-direct power supply from 4s battery or above. Powered directly with battery will generate surges and burn the camera.)
Working Current:480mA @5V / 140mA @12V
Max Micro SD Card Supported: Up to 128G. U3 recommended (2.7K60/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is FAT32, otherwise, it will easily cause errors.
Runcam Hybrid 4K: Manual
STABLE F411 Micro System:
STABLE F411 Flight Controller(16*16mm)
MCU: STM32F411
Gyro: 6-Axis
OSD: BetaFlight OSD w/ AT7456E chip
BEC Output: 5V@2A
Size: 21mm*21mm
Mounting holes: 16mm*16mm
Integrated LC Filter
Input voltage 2-4S LIPO
Firmware target: MATEKF411
STABLE F411 BLheli_S 4IN1 12A ESC(16*16mm)
MCU: BB21F16G
Continuous current: 12A
Input voltage : 2-4S LIPO
ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.